Click image to view full size image
Description
Styrene-butadiene latex is a polymer copolymer obtained by emulsion polymerization of butadiene, styrene, and a carboxylic acid. The product has good adhesion and storage stability.
Styrene-butadiene latex is mainly suitable for paper grades such as coated paper and white cardboard, giving the paper excellent gloss, whiteness and brightness, and strong surface strength.
Specification
Appearance |
White emulsion |
Solid content wt %（150℃、30min） |
50.0±1.0 |
pH |
5.0-8.0 |
Viscosity（mPa.s 、25℃、Brookfield，1#rotor、60rpm） |
≤500 |
Application
Styrene-butadiene latex can be directly added to the batching tank during the coating preparation process.
With good mechanical stability and maneuverability, suitable for various types of coating equipment.
The paper produces a higher gloss, while maintaining a strong bond strength.
Compared with the general carboxystyrene-butadiene latex, it has excellent adhesion and adaptability, and the smell is very small.
Packaging and Storage
Styrene-butadiene latex is packaged in 1000L plastic drum or according to customer requirements.
It should be preserved in closed container to avoid water evaporation and surface crusting.
The container should be stored in dry, well ventilated room, and the room temperature should be between 5-30℃. Keep away from heat, prevent moisture, avoid sun exposure. Shelf life is 6 months. This product is harmless under normal use, but cannot be used as food additives.
Note: The above data are based on our current knowledge and experience. As our products might be used in different conditions and environments, users should take necessary trial to make sure of the suitability. Any loss caused by non-applicability or inappropriate application is out of our responsibility. We are not responsible for any result of using above mentioned formula or data either.
http://www.mingshengnewmaterials.com/